End piece traffic speed bump with teeth for one-way traffic

Prevents vehicles from ignoring mandatory circulation directions

• Made of galvanised steel
• Easy to install both indoors and outdoors (fixing material included)
• Set of 2 pieces
• Dimensions: 200 x 50 x 385 mm
• Weight: +-3kilos
• Maximum load: 40 tonnes
• Centrepiece also in range Art. 18-HERSE1000

For example, on business premises, a circulation plan may be in place and vehicles may be required to follow certain directions of circulation.
To prevent these circulation directions from being ignored, our traffic speed bump with teeth can serve as a solution.

With the 6 fasteners provided, you can easily install this traffic speed bump. Using the square spanner (included), you can loosen 3 bolts which raise the steel teeth. When driving over in the permitted direction, the steel teeth fold away into the mechanism. When a vehicle tries to cross the speed bump in the prohibited direction, the steel teeth will puncture the vehicle's tyres, causing damage.

If, in a particular case, it is necessary to drive in the prohibited direction anyway, you can retighten the 3 bolts which will lower the tines and also keep them in this closed position.

Attention!!! This security must be used extremely carefully:

• Provide clear and abundant signs and warnings, preferably at several locations, including entrances and passages.
• Provide evacuation space and means to remove a stranded vehicle safely and quickly.
• We recommend using the traffic speed bump with teeth only when ignoring one-way facilities poses a real risk of serious accidents.
• This speed bump should only be used at your own risk on private property.
• Although the speed bump requires no special maintenance, it is recommended to check its correct functioning at regular intervals