+32 (2) 410 25 03
Bicycle rack with crossbar 600 x 1050 - galvanised (Art: 20-1000-021)
Email us about this productBicycle rack with crossbar 600 x 1050 mm
Galvanised steel
- U shaped bicycle rack made in one piece without any seams.
- Galvanised steel
- To be placed in concrete - extremely stable.
- Can be used on both sides for bicycles, electrical bicycles, mopeds and motorcycles.
- Limits the risk of theft
- Always in stock
- The bicycle rack has a diameter of 48 mm and a thickness of at least 2,5 mm
Also suitable for electric bikes, mopeds and motorcycles. Please do consider the distance between the racks which needs to cater for the different types of two wheelers that will use them.
The bicycle rack is made from galvanised steel. It is possible that when you receive it, it has a bright and shiny finish. After a few weeks this shiny finish will dull and take on the duller apearance which is normally associated with galvanised steel.
Bicycle racks are widely used in public places. They allow any two-wheeler to be well protected against theft, provided that locks are used. We recommend that the bracket be placed in 35 cm deep concrete.
Our bicycle racks have rounded corners without any sharp edges, so they are safe and friendly for pedestrians and playing children.
We have a wide variety of bicycle racks, in many colours. The most common models are on our webshop, but make sure to contact us if you are looking for another version. Traffic-Shop can offer a made-to-measure service. We can also finish the bicycle racks in a color of your choice, but keep in mind that the use of bicycle chains and locks will eventually damage the paintwork.
Bicycle racks are widely used in public places. They allow any two-wheeler to be well protected against theft, provided that locks are used. We recommend that the bracket be placed in 35 cm deep concrete.
Our bicycle racks have rounded corners without any sharp edges, so they are safe and friendly for pedestrians and playing children.
We have a wide variety of bicycle racks, in many colours. The most common models are on our webshop, but make sure to contact us if you are looking for another version. Traffic-Shop can offer a made-to-measure service. We can also finish the bicycle racks in a color of your choice, but keep in mind that the use of bicycle chains and locks will eventually damage the paintwork.
Our bicycle rack with crossbar comes highly recommended for both domestic and professional use.
Related products
BIKE BRACKET WITH BASE PLATE 600 x 650 mm
Bike bracket with base plate for mounting.
Galvanized or in green RAL 6009
Galvanized or in green RAL 6009
Cycle stand 600 x 800 mm with crossbar on base plates
Sturdy U-shaped cyclestand with extra crossbar to secure your bicycle. On base plates for easy mounting directly on a paved surface.
Flat steel bicycle hoop 750 x 1150 mm with cross tube
Especially sturdy bicycle bracket made of 60 x 12 mm flat steel with additional cross tube. Galvanised and powder-coated in RAL 7043. Other colours available on request.
Flat steel bicycle hoop 750 x 1150 mm with two cross tubes
Especially sturdy bicycle bracket made of 60 x 12 mm flat steel with two additional cross tubes. Galvanised and powder-coated in RAL 7043. Other colours available on request.