Berlin cushion European model

4 of 6 Elements of vulcanised rubber

• 300 x 180 cm has 6 elements 
• Speed Bump for max. 30 km/h 
• Assured security without hindering the traffic flow 
• Permanent or temporary installation 
• Allows smooth passage of buses and cyclists possible 
• Economical, low maintenance cost and durable 
• Complies with European legislation 
• Easy installation 
• Modular system with tongue and groove joints 
• Anti-slip surface 
• Fixings included 
• Available in 200 x 180 cm (4 elements) or 300 x 180 cm (6 elements)
• Available in red from stock and black on demand

A Berlin cushion contributes to slowing down traffic and improves passive road safety.

Our Berlin cushion is made of vulcanised synthetic rubber that ensures durability. It has three reflective white arrows recessed into the rubber surface and additional cat eyes, which ensures optimal visibility under all circumstances.

The Berlin cushion is available in red or black and consists of 4 or 6 elements (200 x 180 or 300 x 180 cm) that are connected at the bottom with metal H profiles. This prevents the elements from moving apart as a result of passing traffic.

Our Berlin cushions have been rigorously tested and comply with French CERTU standards, the only standard currently available for this type of product.

The red version of the Berlin cushion European model is available from stock, the black cushion is available on demand with a delivery time of approx. 2 weeks.

The necessary plugs and bolts for fixing are included as standard, as well as the colored caps to neatly seal the recesses for the bolts afterwards.

A Berlin cushion can be glued on the road surface. This gives even greater adhesion, which can be useful when the installation is done on busy roads with a lot of HGV's. Glueing, however, is not absolutely necessary and can make the removal of the Berlin cushion more difficult later on.

If you decide to also glue your Berlin cushion, we recommend a two-component polyurethane glue. Traffimex does not supply glues.

The cushion comes packed in a wooden crate containing all the elements, fasteners and protective caps. We have crates with one or two Berlin cushions.

The Berlin cushion is intended to maintain a traffic speed of 30 km/h. They are designed in such a way that larger vehicles, such as buses, can run over the cushion without causing discomfort to passengers. We also recommend that you take cyclists into account when positioning a Berlin cushion. It is often quite possible to leave enough space alongside the cushion.

We are happy to provide you with guidance when you are considering installing a Berlin cushion.